Renovating an Older Cutler Bay Home? How to Replace Your Floors with Porcelain

Cutler Bay sits on the edge of Biscayne Bay in South Miami-Dade, and much of its housing dates from the 1970s and 1980s: single-story ranch homes with low-slung rooflines, enclosed patios, and floor plans that were divided into many small rooms. Many of these houses were repaired or rebuilt after Hurricane Andrew in 1992, and over the decades they have collected a mix of floors: original terrazzo, carpet in the bedrooms, small ceramic squares in the kitchen, and whatever the last owner put down in the family room.

If you've bought one of these homes, or you've lived in yours for years and are finally ready to update, new floors are one of the changes that make the biggest difference. Here's how to plan a porcelain floor that suits an older home in a coastal climate.

1. Find out what's under your floors

Before choosing a tile, find out what you're working with. In many Cutler Bay homes of this era, pulling up carpet reveals terrazzo underneath. Some owners love it and restore it; others prefer a fresh, consistent look. Older ceramic tile may also be hiding cracks or hollow spots.

Your installer should check the subfloor for flatness, cracks, and moisture before anything else. Whether new porcelain can go over existing terrazzo or tile, or whether the old floor needs to come up, depends on its condition and on the height you can accept at doors and transitions. That's a decision for your contractor on site, but knowing the answer early keeps your budget and timeline realistic.

2. Think about the whole floor plan, not room by room

Older homes often feel smaller than they are because every room has a different floor. Running one porcelain tile continuously through the entry, living, dining, and kitchen areas, and even into hallways and bedrooms, visually connects the spaces and makes a 1970s layout feel more open, even if you never move a wall.

Large formats help here. Fewer grout lines mean a calmer, more modern look. Ask to see how a large tile looks across a full room in our showroom before you decide; it's often more convincing in person than in photos.

3. Choose a material that handles humidity and salt air

Living close to the bay brings humidity, heavy summer rain, sand tracked in from outside, and salt carried on the breeze. Porcelain is a strong match for these conditions. It's dense and has very low water absorption, so it resists moisture and stains, and it doesn't need the regular sealing that natural marble or other stone requires. It won't swell or warp like some wood or laminate floors can in a humid house, and it cleans up with a simple mop.

For covered patios, pool areas, and entries that get wet, choose a finish rated for those conditions with appropriate slip resistance. Polished tile looks beautiful inside but is not the right choice for a wet outdoor deck. Ask us which of our collections suit exterior use.

4. Pick a look that respects the house

A ranch-style home doesn't have to look like a modern high-rise condo, but it also doesn't need to stay stuck in 1985. Popular directions in Cutler Bay renovations include:

  • Wood-look porcelain for bedrooms and living areas, giving warmth without the worries about humidity.

  • Stone-look and microcement-look tiles for a relaxed, coastal feel that hides sand and everyday dust.

  • Marble-look porcelain in Statuario or Calacatta styles for bathrooms and kitchens, an easy way to make a dated 1980s bath feel new.

You can browse styles on our tile collections page, and our new 2027 porcelain designs are in the showroom now. If you have something specific in mind, we can also manufacture custom designs to order.

5. Plan transitions, doors, and baseboards

Renovating an older home brings practical details that new construction doesn't. New tile, plus adhesive, can raise the floor height, which may mean trimming interior doors, adjusting transitions to other floors, and replacing baseboards. Talk through these points with your installer before ordering, so nothing comes as a surprise mid-project.

6. Measure, then add overage

Measure each room you plan to tile, or bring a floor plan or rough sketch with room dimensions. Your installer will advise how much extra to order for cuts, breakage, and layout pattern. Diagonal and herringbone layouts need more than a straight lay.

We can help you work out quantities from your measurements in the showroom.

7. Know who does what

Benigni Tiles supplies the tile; installation is handled by your own contractor or installer. That way you can hire the crew you trust, and we're glad to share layout and quantity advice with them.

While you're updating the backyard

Plenty of Cutler Bay renovations extend outside. If you've wanted a pool but not the excavation that comes with an in-ground build, take a look at our prefabricated above-ground pools. They're installed in days without excavation on a level site, and you can surround them with matching outdoor porcelain.

Come see it in person

If you live in Cutler Bay, our showroom is just minutes away at 10605 SW 186th St. Stop in Monday to Friday 8:30 AM–5:00 PM or Saturday 8:30 AM–4:00 PM, call (305) 646-1377, or contact us online. Bring photos of your current floors and your room sizes. For more on how we serve the town, visit our Cutler Bay porcelain tile page.

Previous
Previous

Flood-Resilient Floors for Palmetto Bay Homes: Why Porcelain Makes Sense

Next
Next

Outdoor Living Trends in South Florida: Pools, Patios, and Porcelain