A Bathroom Refresh for a Classic Virginia Gardens Home

Virginia Gardens is easy to miss on a map. Incorporated in 1947, it's one of the smallest municipalities in Miami-Dade, a compact residential village of mostly single-family homes just north of Miami International Airport. Many of its houses were built in the postwar decades, and while plenty have been updated over the years, it's still common to find original or long-ago-remodeled bathrooms.

A bathroom refresh is one of the most satisfying projects for an older home. It's a contained space, you use it every day, and new tile makes an immediate difference. Here's how to plan one.

Step 1: Decide on the scope

Bathroom projects range widely. Be clear about which you're doing:

  • Cosmetic refresh: new floor and wall tile, keeping fixtures in place.

  • Partial remodel: new tile plus a new vanity, toilet, or shower fixtures.

  • Full remodel: moving plumbing, changing the layout, converting a tub to a walk-in shower.

Even a cosmetic refresh usually means removing old tile, which can reveal what's underneath. In older bathrooms, it's wise to budget for some surprises.

Step 2: Choose a style that lasts

Trendy colors date quickly, as anyone with a pastel original bathroom knows. For a refresh that still looks good in twenty years:

  • Marble-look porcelain in white or soft grey with gentle veining.

  • Warm stone looks for a spa-like feel.

  • Wood-look floor tile paired with plain wall tile for warmth.

Porcelain is dense with very low water absorption, so it handles daily showers and doesn't need the sealing that natural marble requires.

Step 3: Go large on the walls

Original bathrooms often have small square wall tiles with lots of grout. Larger tiles, such as 30x60 cm or bigger, mean fewer joints to clean and a calmer look that makes a small room feel larger. Running the same tile from floor to ceiling in the shower draws the eye up.

Step 4: Get the floor right

Bathroom floors get wet, so choose a finish with adequate slip resistance, usually matte rather than polished. Smaller tiles or textured finishes give extra grip on a shower floor, and they make it easier for your installer to slope the floor toward the drain.

Step 5: Measure everything

Measure:

  • The floor area.

  • Each wall section you plan to tile, height times width.

  • The shower floor separately, if it will use a different tile.

  • Niches, ledges, and any feature areas.

Subtract large openings such as doors and windows, then ask your installer how much extra to add for cuts. Bring your numbers to the showroom and we'll help.

Step 6: Plan for what's behind the tile

When old tile comes off, your contractor should check walls and floors for water damage, especially around the tub, shower, and toilet. Waterproofing in a new shower is critical; that's part of the installation, handled by your contractor. Benigni Tiles supplies tile and can share product advice, but we don't install.

Step 7: Think about trims and edges

Exposed tile edges, outside corners, and niche edges need finishing. Ask your installer how they plan to handle them, and make sure you order any trim pieces or extra tile needed.

Step 8: Keep spares

Once the job is done, keep a few spare tiles. Bathrooms sometimes need a repair after a plumbing fix, and matching tile years later can be hard.

Beyond the bathroom

Once you see what new tile does for one room, you may want to keep going. Wood-look porcelain is a popular way to replace worn bedroom carpet, and a continuous floor through living areas makes a compact home feel more open. Our new 2027 designs are in the showroom, and we can manufacture custom designs to order. If you have backyard space, our prefabricated above-ground pools install in days with no excavation on a level site.

Ventilation matters

Older bathrooms often lack good exhaust fans. When you remodel, ask your contractor about adding or upgrading one. Porcelain resists moisture, but good ventilation protects the paint, ceiling, and cabinetry around it.

Finally, choose fixtures and accessories, such as towel bars and shelves, before tiling, so your contractor can plan mounting points.

Visit the showroom

Benigni Tiles is at 10605 SW 186th St, a drive south via the Palmetto Expressway and US-1, so a call ahead to (305) 646-1377 helps us prepare. We're open Monday to Friday 8:30 AM–5:00 PM and Saturday 8:30 AM–4:00 PM. Contact us online, browse our tile collections, or see our Virginia Gardens porcelain tile page.

Previous
Previous

Bungalow, Townhome, or High-Rise? Choosing Tile for Your Kind of Miami Home

Next
Next

Porcelain for Doral Businesses: Offices, Showrooms, and Warehouse Spaces